Arduino In MATLAB Simulink is commonly utilized for various purposes across several domains. For signal processing applications, actual-time testing of control frameworks, algorithm creation, and rapid modeling, this type of combination is more helpful.  Read out our ideas which we have worked for scholars.

Procedures to Utilize Arduino with MATLAB and Simulink

1. Arrange MATLAB and Simulink Support Package for Arduino

• It is important to assure that we have installed Simulink and MATLAB on our system.
• Focus on installing the “Simulink Support Package for Arduino Hardware” and the “MATLAB Support Package for Arduino Hardware”.

2. Link MATLAB to Arduino

• Through utilizing the arduino function, a linkage has to be created among the Arduino hardware and MATLAB.

3. Simulink Model for Arduino

• For interacting with Arduino hardware, a Simulink model must be developed which encompasses blocks.
• To the Arduino hardware, we implement the Simulink model.

Installation of Support Packages

MATLAB

• Initially, open the MATLAB.
• Then, click the “Home” tab.
• Choose “Get Hardware Support Packages” after clicking on “Add-Ons”.
• We need to explore “Arduino”, and the “MATLAB Support Package for Arduino Hardware” has to be installed.

Simulink

• In the beginning, open MATLAB.
• Click the “Home” tab.
• The “Add-Ons” has to be selected, and then choose “Get Hardware Support Packages”.
• Concentrate on installing the “Simulink Support Package for Arduino Hardware” by exploring “Arduino”.

Instance: Blinking an LED Using MATLAB and Simulink

MATLAB Instance

1. Link to Arduino

a = arduino(‘COM3’, ‘Uno’); % Replace ‘COM3’ with the correct port for your Arduino

Blink an LED Connected to Pin 13

for i = 1:10

writeDigitalPin(a, ‘D13’, 1); % Turn LED on

pause(1);                    % Wait for 1 second

writeDigitalPin(a, ‘D13’, 0); % Turn LED off

pause(1);                    % Wait for 1 second

end

Simulink Instance

1. Open Simulink and Develop a Novel Model

• Type simulink in the Command Window to initiate Simulink from MATLAB.
• A novel empty model must be developed.

2. Append Blocks to the Model

• From the Simulink Library Browser, we should append an “Arduino Digital Output” block.
• Through the Simulink Library Browser, include a “Pulse Generator” block.

3. Set up the Blocks

• To utilize pin 13, set up the “Arduino Digital Output” block.
• In order to flash the LED, a square wave has to be produced with a suitable duty cycle and period by setting up the “Pulse Generator” block.

4. Link the Blocks

• To the input of the “Arduino Digital Output” block, the result of the “Pulse Generator” block must be linked.

5. Implement the Model

• Click the “Hardware” tab in the simulink model.
• Implement the model to the Arduino hardware by choosing “Build, Deploy & Start”.

Elaborate Simulink Model Procedures

1. Open Simulink Library Browser

• We need to open the “Library Browser” from the Simulink start page.

2. Include Blocks

• Click “Simulink Support Package for Arduino Hardware” > “Common” in the Library Browser.
• Within the model, the “Arduino Digital Output” block must be dragged and dropped.
• Drag and drop the “Pulse Generator” block within the model by clicking “Simulink” > “Sources”.

3. Set up the Pulse Generator Block

• The “Pulse Generator” block has to be double-clicked.
• After that, we have to fix the “Amplitude” to 1.
• The “Period” must be fixed to 2 seconds or any other specified period.
• To accomplish a 1-second on, 1-second off pattern, fix the “Pulse Width” to 50%.

4. Arrange the Arduino Digital Output Block

• The “Arduino Digital Output” block must be double-clicked.
• Then, the “Pin number” has to be fixed to 13 or a specific pin number where our LED is linked.

5. Link the Blocks

• With the input of the “Arduino Digital Output” block, the result of the “Pulse Generator” block should be linked.

6. Implement the Model

• Go to the “Hardware” tab in the Simulink model.
• Then, we have to choose “Build, Deploy & Start”.
• Simulink will implement the model to the Arduino hardware by compiling it. On the basis of the pulse generator arrangements, the LED which is linked to pin 13 must be blinking.

Important 50 arduino matlab Project Topics

Arduino and MATLAB are considered as efficient platforms that are used across numerous fields. On the basis of different fields like biomedical engineering, environmental monitoring, home automation, signal processing, control systems, robotics, and others, we propose some major Arduino MATLAB project topics:

Robotics

1. Autonomous Line-Following Robot
2. Robot Arm Control and Simulation
3. Self-Balancing Robot
4. Quadcopter Control and Stabilization
5. Robot Path Planning and Navigation
6. Obstacle Avoidance Robot
7. Swarm Robotics Coordination
8. Automated Guided Vehicle (AGV) Navigation
9. Human-Robot Interaction Interface
10. Teleoperated Robotic Arm

Control Systems

1. Temperature Control System
2. Inverted Pendulum Balancing
3. Pressure Control System for Hydraulic Systems
4. Fuzzy Logic Controller for Temperature Regulation
5. Solar Panel Tracking System
6. PID Controller Design for DC Motor Speed Control
7. Automatic Door Control System
8. Water Level Control System
9. Two-Wheeled Robot Balance Control
10. Adaptive Cruise Control for Vehicles

Signal Processing

1. ECG Signal Acquisition and Analysis
2. Speech Recognition System
3. Vibration Analysis and Monitoring
4. EEG Signal Processing for Brain-Computer Interface
5. Environmental Noise Monitoring System
6. Real-Time Audio Signal Processing
7. Digital Filtering of Noisy Signals
8. Seismic Signal Monitoring System
9. Heart Rate Monitoring System
10. Digital Oscilloscope using Arduino

Home Automation

1. Automated Irrigation System
2. Voice-Controlled Home Automation
3. Bluetooth-Controlled Home Appliances
4. Automated Curtain Control System
5. Smart Door Lock System
6. Smart Lighting Control System
7. Home Security System with Intrusion Detection
8. Smart Thermostat for Energy Saving
9. Wi-Fi Based Home Automation System
10. Gas Leakage Detection and Alarm System

Environmental Monitoring

1. Weather Station with Data Logging
2. Water Quality Monitoring System
3. Greenhouse Climate Control System
4. Smart Agriculture System with Sensor Networks
5. Wildlife Tracking and Monitoring System
6. Air Quality Monitoring System
7. Soil Moisture Monitoring System
8. Forest Fire Detection System
9. Noise Pollution Monitoring System
10. River Water Level Monitoring System

Biomedical Engineering

1. Gait Analysis System using IMU Sensors
2. Patient Monitoring System with Vital Signs
3. Wireless Body Area Network for Health Monitoring
4. Sleep Apnea Detection System
5. Glucose Monitoring System
6. Blood Pressure Monitoring System
7. Smart Pill Dispenser System
8. Wearable Health Monitoring Device
9. Prosthetic Limb Control using EMG Signals
10. Portable Spirometer for Lung Function Testing

Miscellaneous

1. Remote Weather Monitoring System
2. Smart Parking Management System
3. Energy Meter with Power Consumption Analysis
4. Gesture-Controlled Robot
5. 3D Printer Control and Monitoring System
6. Automated Traffic Light Control System
7. Drone-Based Delivery System
8. Real-Time Clock and Alarm System
9. RFID-Based Attendance System
10. Wireless Sensor Network for Industrial Monitoring

Innovative Topics

1. IoT-Based Smart Grid Management System
2. Augmented Reality for Remote Assistance in Robotics
3. Machine Learning-Based Predictive Maintenance
4. Artificial Intelligence for Autonomous Drone Navigation
5. Blockchain for Secure IoT Data Transmission

In terms of the combination of Arduino with MATLAB and Simulink, we suggested a basic instance, along with implementation procedures. By involving different fields, several major topics are recommended by us, which are specifically relevant to the Arduino MATLAB project.

matlabprojects.org is the leading company who provide you with tailored services and we guarantee best simulation support for your research work. So stay in touch with us for best outcomes. We provide all types of support at an affordable cost.